STRX TITANIUM supplies implant Titanium Alloy Rods for buyers sourcing raw materials for medical component manufacturing. Material selection depends on the specified grade, applicable material standard, dimensional requirements, product condition, and inspection criteria.
Available material grades listed for this product include Grade 1, Grade 2, and Grade 23. Rods are available in round form, with diameters from 3 mm to 200 mm and lengths up to 6,000 mm. Final availability depends on the selected grade, manufacturing route, and order requirements.


Product Specifications
| Item | Details |
|---|---|
| Product | Implant Titanium Alloy Rods |
| Available Grades | Grade 1, Grade 2, Grade 23 |
| Shape | Round rod |
| Diameter | 3–200 mm |
| Length | Up to 6,000 mm |
| Surface Finish | Bright/polished |
| Material Condition | Annealed, subject to grade and order requirements |
| Manufacturing Processes | Forging, rolling and grinding |
| Minimum Order Quantity | 10 kg, subject to confirmation |
Available dimensions and conditions should be confirmed for the selected grade and applicable specification.
Dimensional Tolerances
Dimensional tolerances should be specified according to the applicable product standard, manufacturing process, nominal diameter, and required material condition.
When requesting a quotation, provide the nominal diameter, length, allowable dimensional deviation, and any machining allowance. A drawing or purchase specification is recommended for non-standard dimensions.
Titanium Rod Grades and Applicable Standards
Choosing the correct material grade is the first step when sourcing titanium rods for medical component manufacturing. Grade 1 and Grade 2 are commercially pure titanium, while Grade 23 is a titanium alloy.
| Material Grade | Material Type | Applicable Standard to Confirm | Key Selection Consideration |
|---|---|---|---|
| Grade 1 | Commercially pure titanium | ASTM F67, where applicable | Material requirements, dimensional specifications, and required mechanical properties |
| Grade 2 | Commercially pure titanium | ASTM F67, where applicable | Strength requirements, material condition, and applicable specification |
| Grade 23 | Ti-6Al-4V ELI titanium alloy | ASTM F136, where applicable | ELI chemistry requirements, mechanical properties, and batch documentation |
ASTM F67 covers unalloyed titanium for surgical implant applications, while ASTM F136 covers wrought Ti-6Al-4V ELI alloy for surgical implant applications. Confirm the required standard and product form when requesting a quotation.
Manufacturing and Surface Finishing
Titanium rod manufacturing involves forming and finishing operations selected according to the material grade, required dimensions and specified material condition.
Forging
Used to shape titanium stock into the required form and dimensions. Process availability depends on the selected grade and production requirements.
Rolling
Used to reduce or adjust the cross-sectional dimensions of titanium stock. The available size range depends on the material grade and manufacturing route.
Grinding and Surface Finishing
Grinding can help achieve specified dimensional accuracy and surface conditions. A bright surface finish is listed for this product; other finishes should be confirmed before ordering.


Quality Control and Material Documentation
For implant titanium alloy rods intended for medical component manufacturing, material verification and inspection requirements should be agreed upon before production.
Buyers should confirm the following requirements:
- Material Identification: Grade designation and applicable material specification.
- Chemical Composition: Test results required by the specified material standard.
- Mechanical Properties: Tensile strength, yield strength, elongation and other specified properties.
- Dimensional Inspection: Diameter, length, tolerances and agreed inspection methods.
- Material Condition: Required supply condition and applicable heat-treatment requirements.
- Batch Traceability: Material identification linked to the corresponding quality documentation.
- Additional Inspection: Third-party inspection or supplementary tests, where required and agreed.
A Material Test Certificate (MTC), dimensional inspection records and other quality documents can be discussed according to the product specification and confirmed order requirements. The required documentation, inspection scope and acceptance criteria should be clearly stated in the purchase order.


Applications of Titanium Rods for Medical Manufacturing
Titanium rods may be used as raw materials for manufacturing medical components when the selected grade meets the applicable material specifications and component requirements.
Orthopedic Components
Titanium rod stock may be considered for machining orthopedic components, subject to the specified material properties, component design and manufacturing requirements.
Dental Components
Commercially pure titanium and titanium alloys may be selected for dental component manufacturing according to the required grade, design and applicable specifications.
Surgical and Medical Components
Titanium rods may serve as raw material for components used in surgical instruments and medical equipment, where the selected material meets the relevant technical requirements.
Custom Machined Components
Buyers can specify the material grade, diameter, length, dimensional tolerances and material condition according to their drawings and machining plans.
Material Selection Considerations
The appropriate titanium material depends on the component design, required mechanical properties, applicable material standard and intended manufacturing process. Confirm these requirements before ordering.
Supplying titanium rod stock does not itself establish approval or certification of a finished implant or medical device. The finished product must meet the applicable design, manufacturing, validation and regulatory requirements.
Compare Similar Medical Titanium Rod Products
If you already know the required grade, review the corresponding product page for more specific material information.
Grade 4 Medical Titanium Rods - commercially pure Grade 4 titanium rod options for buyers specifying Grade 4 material.
Grade 23 Ti-6Al-4V ELI Medical Titanium Rod - a dedicated product page for Grade 23 titanium alloy.
Medical Grade Titanium Alloy Bar - an overview for comparing medical-grade titanium material options.
Why Choose Titanium for Medical Implants?
Titanium's biocompatibility is just one of many reasons it is the preferred material for medical implants. Key advantages include:
Corrosion Resistance: Excellent resistance to bodily fluids ensures long-term stability and reduces complication risks.
Strength & Durability: High strength-to-weight ratio makes it ideal for load-bearing implants and dental applications.
Osseointegration: Unique ability to bond with bone tissue, creating stable implant-bone integration.
Radiolucency: Does not interfere with X-rays, CT scans, or MRI imaging, allowing clear monitoring.
Hypoallergenic: Low risk of allergic reactions, suitable for metal-sensitive patients.
Comparison of Implant Materials:
|
Material |
Advantages |
Limitations |
Applications |
|
Grade 4 CP Titanium |
Excellent biocompatibility, corrosion resistance, mechanical properties |
Potential titanium ion release, peri-implant inflammation risk |
Widely used clinically |
|
Titanium Alloy |
Superior corrosion resistance, machinability |
Minimal vanadium/aluminum ion release potential |
Common clinical applications |
|
Ti-Zr Alloy |
Enhanced mechanical stability, fatigue strength, faster bone healing |
Limited long-term clinical data |
Premium applications (e.g., ITI, Nobel) |
Package


FAQ
1. What titanium grades are available for implant titanium rods?
The currently listed grades are Grade 1, Grade 2 and Grade 23 (Ti-6Al-4V ELI). Confirm grade availability and the required material specification before ordering.
2. What is the difference between Grade 1, Grade 2 and Grade 23?
Grade 1 and Grade 2 are commercially pure titanium grades with different specified property requirements. Grade 23 is an extra-low interstitial titanium alloy. Material selection depends on the required mechanical properties, component design and applicable specification.
3. Which standards apply to implant titanium rods?
ASTM F67 covers unalloyed titanium for surgical implant applications, while ASTM F136 covers wrought Ti-6Al-4V ELI alloy for surgical implant applications. The applicable standard depends on the selected grade, product form and purchase requirements.
4. What sizes are available?
The listed diameter range is 3–200 mm, with lengths up to 6,000 mm. Confirm available dimensions and tolerances for the selected grade and manufacturing route.
5. Can you provide an MTC and inspection records?
Material Test Certificates (MTCs) and additional inspection records should be confirmed when placing the order. Specify the required chemical composition, mechanical properties, dimensional inspection, batch traceability and any third-party inspection.
6. Can these rods be used directly as finished medical implants?
No. The rods are raw materials for further manufacturing. Their suitability for a finished implant depends on the material specification, component design, manufacturing controls, validation and applicable regulatory requirements.
Hot Tags: Implant Titanium Alloy Rods, China Implant Titanium Alloy Rods manufacturers, suppliers, factory, Grade 4 Medical Titanium Rods, TM3411 Medical Grade Titanium Alloy Bar, Implant Titanium Alloy Rods rods, Titanium Rods For Medical Implants, Grade23 Ti 6AL4V Eli Medical Titanium Rod, medical titanium rod

