Titanium Tube

Your Professional Titanium Tube Supplier

STRX Titanium is an innovative enterprise integrating technology R&D. Our parent company was established in 2009 and is located on Titanium City Road in the Baoji High-Tech Industrial Development Zone. Leveraging the industrial chain advantages of Baoji's "Titanium Valley" and strong technical support, the company possesses a complete titanium metal processing production line.

Titanium Alloy Seamless Rectangular Tube
Grades: Gr1, Gr2, Gr5, Gr7, Gr9, Gr10, Gr12
Standards: ASTM B861, ASTM B338, ASME SB861, ASME SB338
Process: Seamless (Forging-Pressing-Rolling-Straightening), Welded (Forging-Hot...
read more
Grade1Titanium Seamless Tube
Grade: Gr1
Standards: ASTM B337, ASTM B338, ASTM B861
Process: Hot Forging, Hot Rolling, Cold Rolling
Dimensions: Outer Diameter 3.0mm–114.3mm, Wall Thickness 0.2–4.5mm,...
read more
Grade5 Titanium Alloy Seamless Tube
Grade: Gr5
Standards: ASTM B338, ASTM B861
Process: Hot Forging, Hot Rolling, Cold Rolling
Dimensions: Outer Diameter 3.0mm–114.3mm, Wall Thickness 0.2–4.5mm, Length ≤ 6000mm...
read more
Ti-6Al-4V Titanium Seamless Tube
Grade: Gr5
Standards: ASTM B338, ASTM B861
Process: Hot Forging, Hot Rolling, Cold Rolling
Dimensions: Outer Diameter 3.0mm–114.3mm, Wall Thickness 0.2–4.5mm, Length ≤ 6000mm...
read more
Titanium Square Tube
Grades: Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12
Standards: ASTM B338, ASTM B861
Process: Hot Forging, Hot Rolling, Cold Rolling
Dimensions: Outer Diameter...
read more
Titanium Welded Pipe
Grades: Grade 1, 2, 3, 5, 6, 7, 9, 12, 23, 5 (6Al-4V), 7 (Ti-0.15Pd), 9 (3Al-2.5V), 12, 23 (6Al-4V ELI), 15V-3Al-3Sn-3Cr
Standards: ASTM B337, ASTM B338, ASTM B861, ASTM B862, AMS 4942...
read more
Ti-6Al-4V Titanium Round Tube
Grades: 5 (6Al-4V), 23 (6Al-4V ELI)
Standards: ASTM B337, ASTM B338, ASTM B861, ASTM B862, AMS 4942
Process: Cold Rolling, Cold Drawing, Welding
Dimensions: Outer Diameter...
read more
Grade 23 Medical Titanium Tube
Grade: Gr23
Standards: ASTM B861, ASTM F136
Process: Seamless (Forging-Pressing-Rolling-Straightening), Welded (Forging-Hot Rolling-Cold Rolling-Welding)
Dimensions: Outer...
read more
Grade 7 Ti-0.2Pd Titanium Tube
Grade: Gr7 Ti-0.2Pd
Standards: ASTM B861, ASTM B862, ASTM B338
Process: Seamless (Forging-Pressing-Rolling-Straightening), Welded (Forging-Hot Rolling-Cold Rolling-Welding)...
read more
Grade 9 Ti-3Al-2.5V Titanium Tubes
Grade: Gr9 (Ti-3Al-2.5V)
Standards: ASTM B338, ASTM B861
Process: Seamless tubes (forged, rolled, straightened) | Welded tubes (forged, hot-rolled, cold-rolled, welded)...
read more
Titanium Threaded Tube/Pipe
Grades: Gr1, Gr2, Gr7, Gr9, Gr12
Standards: ASTM B338, ASTM B861, ASTM B862
Process: Seamless (forged, rolled, straightened)
Dimensions:
Outer Diameter: 6–150 mm...
read more
Titanium Capillary Tube/Pipe
Grades: Gr1, Gr2, Gr5, Gr7, Gr9, Gr12
Standards: ASTM B338, ASTM B861, ASTM B862
Process: Seamless (forged, rolled, straightened)
Dimensions:
Outer Diameter: 0.8–4.0...
read more

First 12 Last

Why choose us

Solution

STRX Titanium maintains stable production and R&D capabilities, supported by a well-established after-sales service system. We provide complete non-ferrous metal solutions and supply titanium and titanium alloy products in various grades and standards tailored to the needs of domestic and international clients.

our services

Professional knowledge and technical consultation on titanium products, professional customization consultation on titanium products. We have professional customer service staff and technicians who are always ready to answer any questions you have.

Package

Packaging is carried out based on product specifications, special properties of materials, special treatments of materials, and special requirements of customers. Generally, we use wooden crates that meet the import and export specifications for packaging.

Titanium Alloy Seamless Rectangular Tube

Titanium Tube

Titanium tubes, available in various grades of titanium alloys and pure titanium, are a prime example of the metal's functional versatility. There are 38 titanium grades that meet the standards set by the American Society of Mechanical Engineers (ASME) B-338 and the American Society for Testing and Materials (ASTM) B-338. Some of the approved grades for pressurized service include grades 1, 2, 3, 7, 9, 11, 12, 16, 17, 26 (TIRU-26™), and 27 (TIRU-27™). Among these, grade 2 titanium is the most commonly used, particularly in power plant surface condensers.

Chemical Composition

Material	N	C	H	Fe	O	Al	V	Pa	Mo	Ni	Ti
Grade 1	0.03	0.08	0.015	0.20	0.18	/	/	/	/	/	Balance

Dimensional tolerance of titanium tubes

Allowable Tolerance of outer diameter of titanium pipe
Outer Diameter	3-10	＞10-30	＞30-50	＞50-80	＞80-100	＞100
Allowable Tolerance	+/-0.15	+/-0.30	+/-0.50	+/-0.65	+/-0.75	+/-0.85

Properties of Titanium Tubes

Mechanical Properties

Titanium tubes exhibit high tensile strength and toughness while maintaining low density (about 4.54 g/cm³), which makes them significantly lighter than steel but just as strong. Their Young's modulus is approximately 116 GPa, indicating good stiffness, and tensile strength can reach around 140 MPa or higher depending on the alloy.

Corrosion Resistance

Titanium naturally forms a stable oxide layer that protects it from corrosion in aggressive environments, including seawater, acidic solutions, and high temperatures. This property makes titanium tubes ideal for chemical processing plants, desalination systems, and marine equipment.

Thermal and Electrical Properties

Titanium tubes have a melting point of 1668 °C and a boiling point of 3560 °C, allowing them to perform well under high temperatures. Their thermal conductivity is moderate (about 21.9 W/m·K), and they have relatively high electrical resistivity, making them suitable for specialized electrical and thermal applications.

Biocompatibility

Titanium is non-toxic and biocompatible, which is why titanium tubes are used in medical implants and surgical instruments.

Manufacturing Process of Titanium Tubes

Raw Material Extraction and Preparation
Titanium is extracted from ores such as rutile and ilmenite using the Kroll process, which converts titanium dioxide into titanium tetrachloride and then reduces it to metallic titanium sponge.

Melting and Alloying
The titanium sponge is melted in vacuum arc furnaces, often alloyed with elements like aluminum and vanadium to enhance properties. The molten metal is cast into ingots.

Forming Tubes
- Extrusion or Piercing: For seamless tubes, ingots are heated and pierced to create hollow cylinders.

- Rolling and Welding: For welded tubes, titanium sheets are rolled into tubes and welded.

- Cold Drawing: Tubes may be cold drawn over mandrels to improve precision.

Heat Treatment
Heat treatments such as annealing improve mechanical properties and relieve stresses.

Quality Control and Inspection
Non-destructive testing methods including radiographic testing (RT), penetrant testing (PT), positive material identification (PMI), and hydrostatic testing ensure the integrity and quality of titanium tubes.

Titanium Tube Applications

Aerospace

Used in aircraft structures, engine components, and hydraulic systems due to their high strength-to-weight ratio and resistance to corrosion.

Medical

Employed in medical implants such as bone plates, dental implants, and surgical instruments due to their biocompatibility and corrosion resistance.

Chemical Processing

Utilized in chemical reactors, heat exchangers, and piping systems due to their resistance to corrosion by acids and chemicals.

Power Generation

Found in power plants for heat exchangers, condensers, and steam turbine components due to their high-temperature strength and corrosion resistance.

Oil and Gas Industry

Used in offshore drilling rigs, subsea pipelines, and refinery equipment due to their resistance to corrosion in harsh environments.

Automotive

Employed in exhaust systems, hydraulic lines, and suspension components for their lightweight nature and resistance to high temperatures and corrosion.

Sports and Recreation

Utilized in bicycle frames, golf club shafts, and marine equipment due to their lightweight and durable properties.

Architectural Design

Found in architectural structures such as handrails, support beams, and artistic installations for their aesthetic appeal and durability.

MECHANICAL PROPERTIES
Tensile strength, min (Mpa)	240,00	345,00	895,00	345,00	620,00	483,00	828,00
Yield strength, 0,2% Offset, min (Mpa)	170,00	275,00	825,00	275,00	483,00	345,00	759,00
Elongation (in 4D, min, %)	24,00	20,00	10,00	20,00	15,00	18,00	10,00
Reduction of Area, min, %	30,00	30,00	25,00	30,00	25,00	25,00	15,00
*Hardness Interpolated**	Rb70	Rb80	Rc36	Rb80	Rc28	Rc17*

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory/manufacture.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 45-90 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: 30% T/T in advance ,balance before shippment or BL at sight.

As one of the leading titanium tube manufacturers and suppliers in China, we warmly welcome you to buy high quality titanium tube for sale here from our factory. Good service and reasonable price are available.

1 75 titanium tube, titanium alloy tube, 4 titanium pipe