STRX TITANIUM supplies titanium hexagonal bars in commercially pure titanium and titanium alloy grades for industrial machining and component manufacturing. With a hexagonal cross-section, titanium hex bar stock can be used for machined parts, fasteners, equipment components, and other applications requiring specific dimensions and material properties.
Available specifications include sizes from 3.0 to 350 mm across flats and lengths up to 6,000 mm. Bright and polished surface finishes are listed. Contact us with your required grade, dimensions, length, and applicable standard to discuss availability and request a quotation.
Titanium Hex Bar Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
Titanium Hexagonal Bar |
|
Material |
Commercially Pure Titanium, Titanium Alloys |
|
Available Grades |
Grade 2, Grade 5, Grade 9* |
|
Applicable Standards |
ASTM B348, ASTM F67, ASTM F136, AMS 4928* |
|
Size (Across Flats) |
3.0–350 mm |
|
Length |
Up to 6,000 mm |
|
Surface Finish |
Bright, Polished |
|
Shape |
Hexagonal |
Available Titanium Grades
Grade 2 Titanium Hex Bar
Grade 2 is a commercially pure titanium grade. It may be considered for applications where corrosion resistance and the properties of commercially pure titanium are required. Confirm the required dimensions, supply condition, and applicable standard before ordering.
Grade 5 Titanium Hexagonal Bar
Grade 5 titanium, also known as Ti-6Al-4V, is a titanium alloy used in applications requiring a combination of strength and relatively low density. Confirm grade availability and the applicable product specification for hexagonal bar stock.
Grade 9 Titanium Hex Bar
Grade 9 titanium, commonly identified as Ti-3Al-2.5V, is a titanium alloy used in selected engineering applications. Material selection should be based on the required mechanical properties, operating conditions, and applicable specification.
Grade availability and standard applicability should be confirmed for the requested hexagonal dimensions and supply condition.
Mechanical Properties Of Titanium Hex Bar
The mechanical properties of titanium hex bar depend on the material grade, applicable specification, and supply condition. The following values are reference data and should be verified against the requirements for the ordered product.
| Grade | Tensile Strength, min. | Yield Strength (0.2%), min. | Elongation, min. |
|---|---|---|---|
| Grade 2 | 345 MPa (50 ksi) | 275 MPa (40 ksi) | 20% |
| Grade 5 (Ti-6Al-4V) | 895 MPa (130 ksi) | 828 MPa (120 ksi) | 10% |
| Grade 9 (Ti-3Al-2.5V) | 620 MPa (90 ksi) | 483 MPa (70 ksi) | 15% |
These values are for reference only. Confirm the applicable material standard, product form, supply condition, and test requirements before placing an order.
Surface Finish And Dimensional Requirements
Bright and polished finishes are listed for STRX TITANIUM titanium hexagonal bars. When requesting a quotation, specify the required surface condition, across-flats dimension, length, dimensional tolerance, and any additional machining requirements.
If the part will be machined to a finished component, a technical drawing can help clarify the required dimensions and acceptance criteria.
Titanium Hexagonal Bar Sizes
The size of a titanium hexagonal bar is measured across opposite flat faces. When selecting titanium hex bar stock for machining or component production, specify the required across-flats dimension, length, material grade, and dimensional tolerance.
For non-standard dimensions or machining requirements, include a drawing with your inquiry so we can review the specifications before quoting.
Titanium Hex Bar Size Guide
|
Parameter |
Description |
|---|---|
|
Size Measurement |
Across flats |
|
Size Range |
3.0–350 mm |
|
Length Range |
Up to 6,000 mm |
|
Surface Finish |
Bright or polished |
|
Quotation Requirements |
Grade, across-flats size, length, quantity, tolerance, standard |
The size of a titanium hex bar is measured across opposite flat faces. When requesting a quotation, specify the material grade, across-flats dimension, length, dimensional tolerance, surface finish, and applicable standard. A technical drawing is recommended for non-standard dimensions or additional machining requirements.
Applications Of Titanium Hexagonal Bar
Titanium hexagonal bar is used in machining and industrial manufacturing where its hexagonal profile, corrosion resistance, and strength-to-weight ratio suit the component design.
Typical applications include:
- Machined Components: Parts manufactured to specific dimensions and profiles.
- Fasteners and Connection Components: Components designed around a hexagonal bar profile.
- Chemical Processing Equipment: Parts selected for compatibility with the operating environment.
- Marine Hardware: Components requiring suitable corrosion resistance.
- Industrial Machinery: Custom-machined parts and equipment components.
Material grade and suitability depend on the operating environment, design requirements, and applicable material specification. Aerospace and medical applications may require additional material verification, traceability, and qualification.
Manufacturing And Inspection
Titanium hex bar requirements can vary by material grade, across-flats dimension, length, surface finish, and supply condition. These details should be confirmed before production or order fulfillment.
For project-specific requirements, provide a technical drawing and identify the applicable material specification, dimensional tolerances, and inspection criteria. Confirm available production processes, inspection methods, and documentation for the requested product before placing the order.


Why Choose STRX TITANIUM?
Specification-focused support: Discuss material grade, dimensions, and applicable standards before ordering.
Documentation: Material test certificates and dimensional reports can be requested, subject to order requirements.
Shipping options: FOB, CFR, CIF, and door-to-door arrangements are listed; availability depends on the shipment.
Responsive communication: Contact our team to discuss product requirements and quotation details.
Quality issue handling: Contact us with supporting information if a supplied product does not meet the agreed requirements.
Frequently Asked Questions
1. What sizes are available for titanium hex bar?
The listed size range is 3.0–350 mm across flats, with lengths up to 6,000 mm. Confirm availability for the required grade and dimensions.
2. Which titanium grades are available?
The page lists Grade 2, Grade 5 (Ti-6Al-4V), and Grade 9 (Ti-3Al-2.5V). Confirm the available grade and product specification before ordering.
3. Which standards apply to titanium hexagonal bar?
The current page lists ASTM B348, ASTM F67, ASTM F136, and AMS 4928. The applicable standard depends on the material grade, product form, and order requirements; confirm the correct specification before purchase.
4. What surface finishes are available?
Bright and polished finishes are listed. Specify the required surface condition when requesting a quotation.
5. Can I request a quotation for custom dimensions?
Provide the required across-flats size, length, grade, quantity, tolerance, and any relevant drawing. The requested specifications can then be reviewed for availability.
6. What quality documents can be provided?
Material test certificates and dimensional reports are stated as available upon request. Confirm the required documents and inspection criteria before placing your order.
Contact us
STRX TITANIUM supplies titanium products for industrial customers. Send your requirements to discuss the appropriate material specification, available dimensions, and delivery options.
Email: info@strx-titanium.com
Hot Tags: titanium hexagonal bar, China titanium hexagonal bar manufacturers, suppliers, factory, Grade 12 0 8NI 0 3MO titanium Bars, titanium tig welding wire, solid titanium rod, 3 16 titanium rod, Grade 2 Titaninm Round Rod, Titanium Flat Bar strip

