What Is Titanium Square Tube?
Titanium square tube is a hollow profile made from titanium or titanium alloy, featuring a square cross-section. Compared with a solid titanium square bar, its hollow structure reduces material use and component weight when a solid section isn't required.
Titanium offers a low density, a high strength-to-weight ratio, and corrosion resistance in suitable environments. For equipment manufacturers and structural fabricators, square tubing provides four flat external faces that can simplify mounting, alignment, and integration with plates, brackets, and other structural components. Select the appropriate grade, outside dimensions, wall thickness, and manufacturing process based on the application and design requirements.
Titanium Square Tube Specifications
Titanium square tubes are hollow sections with four sides of equal nominal width. The final specification should identify the outside dimensions, wall thickness, length, corner radius where applicable, dimensional tolerances, material grade, and manufacturing requirements.
| Item | Specification |
|---|---|
| Product Name | Titanium Square Tube / Titanium Square Tubing |
| Material Grades | Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12 |
| Cross-Section | Square Hollow Section |
| Outside Dimensions | 11 × 11 mm to 150 × 150 mm listed sizes; actual availability to be confirmed |
| Wall Thickness | Reference range: 0.5–8.0 mm; size-dependent |
| Length | Up to 6,000 mm, customizable subject to confirmation |
| Manufacturing Process | Welded tube forming and square sizing; seamless availability to be confirmed |
| Surface Finish | Pickled, sandblasted |
| Applicable Standards | ASTM B338 / ASTM B861 listed in the existing product information; applicability to the specific square-tube product must be confirmed |
| Dimensional Control | Outside dimensions, wall thickness, length, corner radius and tolerances according to the agreed specification |
| Inspection Options | Ultrasonic testing, eddy current testing, flaring, flattening, hydrostatic testing, visual inspection, dimensional inspection, tensile testing and chemical composition analysis, where applicable |
| Quality Documents | Material test certificate and third-party inspection reports, subject to confirmation |
| Customization | Dimensions, length, material grade, surface finish and inspection requirements according to the project specification |
Note
The dimensional ranges above are preliminary reference values for page drafting. Confirm the available sizes, wall thicknesses, manufacturing routes, applicable standards and inspection scope before publication.
Standard And Custom Titanium Square Tube Sizes
The following nominal square sizes are listed in the current product information. Availability, wall thickness, tolerances, and manufacturing route should be confirmed for each size before quotation.
| Outside Dimensions (W × H) | Reference Wall Thickness | Length |
|---|---|---|
| 11 × 11 mm | To be confirmed | Custom length |
| 15 × 15 mm | 1.0–1.5 mm, subject to availability | Custom length |
| 16 × 16 mm | To be confirmed | Custom length |
| 20 × 20 mm | 1.2 / 1.5 / 2.0 mm | Custom length |
| 22 × 22 mm | To be confirmed | Custom length |
| 25 × 25 mm | 1.2 / 1.5 / 2.0 / 3.0 mm | Custom length |
| 26 × 26 mm | To be confirmed | Custom length |
| 30 × 30 mm | 1.2 / 1.5 / 2.0 / 3.0 mm | Custom length |
| 35 × 35 mm | To be confirmed | Custom length |
| 40 × 40 mm | 1.2 / 1.5 / 2.0 / 3.0 mm | Custom length |
| 45 × 45 mm | To be confirmed | Custom length |
| 50 × 50 mm | 1.5 / 2.0 / 3.0 mm | Custom length |
| 60 × 60 mm | 2.0 / 3.0 mm | Custom length |
| 80 × 80 mm | 2.0 / 3.0 mm | Custom length |
| 85 × 85 mm | To be confirmed | Custom length |
| 100 × 100 mm | 2.0 / 3.0 mm | Custom length |
| 150 × 150 mm | To be confirmed; custom production feasibility required | Custom length |
Titanium square tubes may be produced by welded or seamless manufacturing routes, depending on the required section dimensions and production feasibility.
Note
Reference wall thicknesses are for preliminary specification planning only. Actual availability and production feasibility must be confirmed before quotation.
Titanium Square Tube Vs. Round Tube
Square and round titanium tubes serve different design needs. The preferred cross-section depends on how the component will be installed, connected, loaded, and used.
| Comparison |
Titanium Square Tube
|
|
|---|---|---|
| Cross-Section | Square hollow section with four flat sides | Circular hollow section |
| Main Design Advantage | Flat faces can simplify mounting, positioning and structural integration | Circular profile suits round interfaces and conventional tubular systems |
| Equipment Frames | Suitable when the design requires square profiles and flat mounting surfaces | Suitable when circular tubing fits the frame or assembly design |
| Connection Design | Can simplify attachment to flat plates and brackets in some designs | May require clamps, saddles or round interfaces, depending on the connection |
| Fluid Transfer | Requires assessment of flow, cleaning, pressure and connection requirements | Commonly used for conventional fluid-transfer systems |
| Space Arrangement | Flat faces can simplify alignment in certain assemblies | Suitable for layouts designed around circular tubes and fittings |
| Weight and Material Use | Depends on outside dimensions, wall thickness, grade and load requirements | Depends on diameter, wall thickness, grade and load requirements |
| Customization | Outside width, height, wall thickness, corner radius and length can be specified | Outside diameter, wall thickness and length can be specified |
| Best Selection Criteria | Square geometry, flat mounting surfaces and structural integration | Circular interfaces, pipe connections and fluid-system requirements |
Neither shape is automatically stronger, lighter or less expensive. Selection should be based on the required cross-section, design loads, dimensions, connection details, manufacturing route and total project cost.
When Should You Choose Titanium Square Tube Instead Of Round Tube?
Titanium square tube is worth considering when the finished component requires a square profile rather than simply a hollow titanium section.
1. Equipment Frames and Structural Supports
Square tubing can be integrated into frames, equipment supports, and fabricated assemblies where flat sides simplify alignment or connection to other components.
2. Flat Mounting and Connection Surfaces
The flat faces of a square tube can make it easier to position mounting plates, brackets, and other components. Hole placement, welding, and local reinforcement should follow the engineering drawing and fabrication requirements.
3. Custom Industrial Components
When an assembly is designed around a square hollow section, using a square tube can reduce the need to adapt a round tube to a non-circular interface. This can simplify the geometry of the finished component.
4. Weight-Sensitive Designs
A hollow section can reduce material use compared with a solid square bar of the same outside dimensions. Whether a square tube is lighter or more suitable than a round tube depends on the selected dimensions and required structural performance.
5. Drawing-Based Fabrication
For equipment manufacturers and structural fabricators, a drawing-based specification helps define the outside dimensions, wall thickness, corner radius, length, tolerances, machining features, and inspection requirements needed for production.
Engineering note: Square tubing should not be selected solely by its shape. Structural loads, local buckling, connection strength, corrosion conditions, and any applicable design or pressure requirements must be evaluated for the intended service.
Manufacturing Process And Quality Inspection
The manufacturing route for titanium square tube depends on whether the product is welded or seamless and on the required dimensions and tolerances.
For welded square tubing, the process may involve preparing flat-rolled titanium material, forming it into a tube, welding the seam, sizing the tube into a square profile, and cutting it to length. The actual process and available product range should be confirmed with the manufacturer.
Seamless square sections require a separate confirmation of manufacturing feasibility and available sizes. Do not assume that the same manufacturing route or dimensions apply to both welded and seamless products.

Inspection Options
Inspection should be agreed according to the product specification, manufacturing route, applicable standard, and end-use requirements.
- Dimensional Inspection: Checks the specified outside dimensions, wall thickness, length, and other agreed dimensional characteristics.
- Visual Inspection: Checks visible surface condition and workmanship.
- Tensile Testing: Evaluates tensile properties against the applicable requirements.
- Chemical Composition Analysis: Verifies material chemistry as required.
- Ultrasonic Testing (UT): Used where required and suitable for the product and inspection specification.
- Eddy Current Testing (ET): Used where applicable to the product and agreed inspection requirements.
- Flaring, Flattening, and Hydrostatic Tests: Apply only where appropriate to the product form and specified acceptance requirements.
Available tests and quality documents should be confirmed before an order is placed.

Applications Of Titanium Square Tube
Titanium square tubing may be considered for custom components in applications where titanium's material properties and a square hollow profile meet the design requirements.
Equipment Manufacturing: Frames, supports, and custom equipment components.
Structural Fabrication: Hollow sections incorporated into engineered assemblies.
Chemical and Industrial Equipment: Components designed for specified corrosive environments.
Marine and Offshore Equipment: Applications requiring material selection for the actual service environment.
Custom Machinery: Drawing-based components with specific cross-sectional and connection requirements.
Specialized Engineering Projects: Projects where weight, corrosion resistance, and profile geometry are part of the material selection criteria.
The suitability of a particular grade and tube specification should be established from the operating environment, mechanical requirements, applicable standards, and engineering design.
Why Choose STRX TITANIUM

Multiple Titanium Grades: Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, and Grade 12 options, subject to product availability.
Specification-Based Supply: Product requirements can be reviewed according to the required dimensions, wall thickness, length, and applicable standard.
Surface Finish Options: Pickled and sandblasted finishes are available, subject to specification.
Inspection and Documentation: Inspection requirements and material documentation can be discussed according to the order specification.
Direct Technical Communication: Contact STRX TITANIUM to discuss material selection and product requirements for your application.
Frequently Asked Questions
What is titanium square tube?
Titanium square tube is a hollow titanium or titanium alloy profile with a square cross-section. It is used where the design requires a square hollow section rather than a round tube or solid bar.
What is the difference between titanium square tube and titanium round tube?
The main difference is the cross-sectional geometry. Square tubing provides flat external faces that can simplify certain mounting and structural connections, while round tubing is commonly used in circular pipework and applications designed around round interfaces.
Can titanium square tubes be customized?
Custom dimensions can be evaluated according to the required grade, outside dimensions, wall thickness, length, tolerances, manufacturing route, and inspection requirements. Confirm the available range before placing an order.
Which titanium grades are available?
The listed grades are Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, and Grade 12. Confirm grade availability for the requested dimensions and manufacturing route.
Are titanium square tubes available as welded and seamless products?
The required product form must be confirmed for the requested size and grade. Welded and seamless square sections may have different manufacturing limitations and availability.
What information is needed for a quotation?
Provide the material grade, outside dimensions, wall thickness, length, quantity, manufacturing requirements, applicable specification, surface finish, inspection requirements, and destination. A technical drawing is helpful for custom profiles.
Contact STRX TITANIUM
Looking for titanium square tubing for equipment manufacturing, structural fabrication, or a custom industrial component?
Send your drawing, dimensions, material grade, quantity, and inspection requirements to info@strx-titanium.com.
STRX TITANIUM - Send Inquiry for Your Project
Hot Tags: titanium square tube, China titanium square tube manufacturers, suppliers, factory, Grade 9 Ti 3Al 2 5V Titanium Tubes, 1 5 od titanium tube, 3al 2 5 v titanium tubing, 4 titanium pipe, 5 inch titanium pipe, Grade5 Titanium Alloy Seamless Tube




