ERTi-7 Titanium Welding Wire

ERTi-7 Titanium Welding Wire

Grade: Gr7 (ERTi-7)
UNS Number: R52401
Specification: AWS A5.16
Diameter: 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.2 mm
Standard Length: 1000 mm
Surface: Pickled, Polished, Bright
Form: Straight, Spool, Coil
Surface: Bright, Pickled
Delivery: 5-20 days
Material Certification: MTC and SGS test reports available
Free samples available
Send Inquiry

STRX TITANIUM supplies ERTi-7 Titanium Welding Wire for welding titanium components used in chemical processing, heat exchangers, piping systems and other corrosion-resistant equipment. Classified under AWS A5.16, ERTi-7 is a palladium-containing titanium filler metal designed for applications requiring improved corrosion resistance in certain service environments.

 

ERTi-7 welding wire is available in diameters from 1.0 mm to 3.2 mm, with straight lengths, spools and coils available. Standard straight wire length is 1000 mm. Custom cutting, surface finishes and delivery forms can be arranged according to project requirements.

Product Highlights

AWS A5.16 | Grade 7 | UNS R52401 | 1.0–3.2 mm Diameter | Straight / Spool / Coil | MTC and SGS Reports Available

ERTi-7 Titanium Welding Wire Specifications

Item Specification
Product ERTi-7 Titanium Welding Wire
Grade Grade 7 (ERTi-7)
UNS Number R52401
Specification AWS A5.16
Diameter 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.2 mm
Standard Straight Length 1000 mm
Surface Finish Pickled, Polished, Bright
Delivery Form Straight, Spool, Coil
Customization Custom-cut lengths according to customer requirements
Delivery Time 5–20 days, subject to order quantity and production schedule
Quality Documents Material Test Certificate (MTC) and SGS test reports available
Samples Free samples available

Note: Available dimensions, delivery forms and inspection documents should be confirmed according to order requirements.

What Is ERTi-7 Titanium Welding Wire?

ERTi-7 is a titanium welding filler metal classified under AWS A5.16. It corresponds to Grade 7 titanium and contains a small addition of palladium (Pd). Its UNS designation is R52401.

 

The palladium addition improves the corrosion resistance of the weld metal in certain reducing environments. This makes ERTi-7 a suitable filler metal for selected titanium welding applications where corrosion resistance is an important material requirement.

 

ERTi-7 is commonly considered for welding Grade 7 titanium components. Depending on the base metal, service conditions and qualified welding procedure, it may also be considered for selected applications involving other titanium grades, such as Grade 2 and Grade 16. Filler metal selection should be verified against the base metal specification and project requirements.

product-1919-1439
product-1440-1079

Chemical Composition of ERTi-7 Welding Wire

ERTi-7 is a palladium-containing titanium filler metal. The following table shows commonly published reference composition ranges for ERTi-7 welding filler metal. Actual chemical composition should be confirmed by the material test certificate for the supplied batch and the applicable AWS A5.16 requirements.

Element Reference Composition (wt.%)
Carbon (C) ≤ 0.03
Oxygen (O) 0.08–0.16
Nitrogen (N) ≤ 0.015
Hydrogen (H) ≤ 0.008
Iron (Fe) ≤ 0.12
Palladium (Pd) 0.12–0.25
Titanium (Ti) Balance

Technical Note: These are reference values compiled from publicly available product data, not a guaranteed STRX batch specification. Final acceptance should be based on the applicable standard and the actual inspection certificate.

Corrosion Resistance of ERTi-7 Weld Metal

The main difference between ERTi-7 and unalloyed titanium filler metals is the addition of palladium. In suitable environments, palladium helps improve the corrosion resistance of the weld metal, particularly under certain reducing acid conditions and in environments where crevice or under-deposit corrosion may occur.

 

This characteristic makes ERTi-7 a consideration for titanium equipment exposed to selected chemical process fluids. However, corrosion performance depends on the acid type, concentration, temperature, oxidizing or reducing conditions, impurities and equipment design.

For critical chemical processing applications, filler metal selection should be evaluated together with the base metal, service environment and applicable welding procedure. Corrosion testing may be required for demanding operating conditions.

Applications of ERTi-7 Titanium Welding Wire

ERTi-7 titanium welding wire is used in selected fabrication and repair applications where the corrosion resistance of titanium weld metal is important.

Chemical Processing Equipment

Welding selected titanium vessels, tanks and process equipment exposed to corrosive fluids.

Heat Exchangers

Fabrication and repair of titanium heat exchanger components and related equipment.

Titanium Piping Systems

Welding compatible titanium pipes, fittings and process connections.

Valves and Fittings

Joining titanium components used in chemical and industrial fluid-handling systems.

Welding Recommendations

Titanium welding requires effective protection from atmospheric contamination at elevated temperatures. Oxygen, nitrogen, hydrogen and surface contaminants can affect weld quality and the performance of the finished joint.

01. Surface Preparation

Clean the base metal and filler wire before welding. Remove oil, grease, moisture, dirt and surface contaminants from the joint area. Use clean tools and handling practices to avoid recontamination.

02. Shielding Gas

Argon is commonly used as the shielding gas for TIG (GTAW) titanium welding. Gas purity, flow rate and torch setup should be selected according to the welding procedure and joint configuration.

03. Weld and Heat-Affected Area Protection

Provide adequate shielding for the weld pool, hot weld metal and heat-affected areas. A trailing shield may be required to protect the cooling weld region. For pipe and enclosed-section welding, suitable internal back purging should be considered.

04. Welding Parameters

Current, polarity, travel speed, shielding gas flow and other welding parameters should follow the qualified Welding Procedure Specification (WPS). DC electrode negative (DCEN) is commonly used for TIG welding of titanium, subject to the selected equipment and qualified procedure.

05. Filler Wire Handling

Keep welding wire clean and dry before use. Avoid direct contact with contaminated surfaces and protect opened packages from dust, moisture and handling contamination.

Quality Inspection and Material Certification

Consistent material quality and traceable inspection records are important when purchasing titanium welding wire for industrial fabrication. STRX TITANIUM can provide material documentation and inspection support according to order requirements.

  • Chemical Composition Analysis: Verification of alloying elements and relevant impurity elements.
  • Dimensional Inspection: Checking wire diameter and specified length.
  • Surface Inspection: Checking the wire surface for visible defects and contamination.
  • Material Test Certificate: MTC available for supplied material, subject to order requirements.
  • Third-Party Inspection: SGS test reports or third-party inspection arrangements can be discussed according to project requirements.

Inspection scope and documentation should be agreed upon before order confirmation. Batch-related test results should be checked against the supplied material and its identification records.

product-1440-1080
product-1080-810

Why Choose STRX TITANIUM for ERTi-7 Welding Wire?

Specified Product Range ERTi-7 titanium welding wire in diameters from 1.0 mm to 3.2 mm.
Multiple Delivery Forms Straight wire, spool and coil options according to availability and order requirements.
Surface Options Pickled, polished and bright surface finishes.
Custom Lengths Cutting and length requirements can be discussed for individual projects.
Inspection Documentation MTC and SGS test reports available according to order requirements.
Sample Support Free samples available for material evaluation.
Order Coordination Delivery arrangements and inspection requirements can be confirmed before production or shipment.

Package

product-1440-1080
product-1708-1280

Frequently Asked Questions

1. What Is ERTi-7 Titanium Welding Wire?

ERTi-7 is a titanium welding filler metal classified under AWS A5.16. It corresponds to Grade 7 titanium and contains 0.12–0.25% palladium as a commonly published reference range. Its UNS designation is R52401.

2. What Is the AWS Standard for ERTi-7 Welding Wire?

ERTi-7 is classified under AWS A5.16, the specification for titanium and titanium-alloy welding electrodes and rods. The applicable standard edition and acceptance requirements should be confirmed for each order.

3. Which Titanium Grades Can Be Welded with ERTi-7?

ERTi-7 is primarily associated with Grade 7 titanium. It may also be considered for selected dissimilar or compatible titanium welding applications involving grades such as Grade 2 or Grade 16, depending on the base metal, service environment and qualified welding procedure.

4. What Is the Difference Between ERTi-2 and ERTi-7?

ERTi-2 is an unalloyed titanium filler metal, while ERTi-7 contains a small addition of palladium. The palladium addition gives ERTi-7 improved corrosion resistance in certain reducing environments. The appropriate filler metal depends on the base metal and service conditions.

5. What Diameters and Delivery Forms Are Available?

Available diameters include 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm and 3.2 mm. Delivery forms include straight wire, spool and coil. Standard straight wire length is 1000 mm, and custom-cut lengths can be discussed.

6. What Documents Can Be Supplied with ERTi-7 Welding Wire?

Material Test Certificates (MTC) and SGS test reports are available according to order requirements. Inspection scope and documentation should be confirmed when placing the order.

Request a Quote for ERTi-7 Titanium Welding Wire

Looking for ERTi-7 titanium welding wire for industrial fabrication or corrosion-resistant equipment? Contact STRX TITANIUM with your required diameter, delivery form, quantity, length and inspection requirements.

Our team can assist with product specifications, sample arrangements, material documentation and delivery coordination.

Email: info@strx-titanium.com

Hot Tags: erti-7 titanium welding wire, China erti-7 titanium welding wire manufacturers, suppliers, factory, Titanium Welding Wire Spool, titanium welding filler rod, titanium filler rod, Titanium 6Al 4V Welding Wire, erti 5 filler rod, ERTi 1 Pure Titanium Welding Wire