Hot Rolling Titanium Plate

Hot Rolling Titanium Plate

Material: Grade 1, Grade 2, Grade 3, Grade 5, Grade 6, Grade 7, Grade 9, Grade 12, Grade 23
Standard: ASTM B265
Thickness: 3-20 mm
Dimensions: 2 mm × 6000 mm (customizable)
Surface: Bright, Pickled
Shape: Custom-cut per client requirements
Delivery: 5-20 days
Material Certification: MTC and SGS test reports available
Free samples available
Send Inquiry

STRX TITANIUM supplies hot rolling titanium plates in commercially pure titanium and titanium alloy grades, including Grade 1, Grade 2, Grade 3, Grade 5, Grade 6, Grade 7, Grade 9, Grade 12 and Grade 23. These plates are used in chemical processing, heat exchangers, desalination equipment, aerospace structures and other industrial applications where material grade, plate thickness and corrosion or mechanical performance must match the service conditions.

 

Our hot rolled titanium plate range covers thicknesses from 3 mm to 20 mm. Pickled and bright surface options, custom cutting and dimensional requirements can be discussed according to the selected grade and order specification. Material test certificates and inspection documents can be provided according to the agreed requirements.

hot rolling titanium plates
hot rolling titanium plates

 

What Is Hot Rolled Titanium Plate?

 

Hot rolled titanium plate is produced by reducing a titanium slab or intermediate stock through rolling at an elevated temperature. Heating makes the material more workable during deformation and allows the production of plate products in medium and heavier thickness ranges.

Hot rolling is an important processing route for titanium plate because titanium has a high melting point, strong chemical reactivity at elevated temperatures and specific deformation characteristics. Temperature control, atmosphere protection, rolling reduction and subsequent processing all influence the final product quality.

Hot rolled titanium plate is not defined by thickness alone. The material grade, rolling route, heat treatment, surface condition and delivery requirements must also be considered when selecting a plate for industrial use.

 

Hot Rolling Titanium Plate Specifications

 

Item Specification
Product Hot Rolled Titanium Plate
Material Grades Grade 1, Grade 2, Grade 3, Grade 5, Grade 6, Grade 7, Grade 9, Grade 12, Grade 23
Main Standard ASTM B265
Thickness 3–20 mm
Width Custom dimensions according to order requirements
Length Custom dimensions according to order requirements
Surface Finish Pickled, Bright
Shape Flat plate, cut-to-size plate
Processing Hot rolling, with subsequent processing according to product requirements
Inspection Documents Material Test Certificate (MTC), inspection reports according to order requirements

Note: Available dimensions, surface condition, heat treatment and delivery condition depend on the selected grade and applicable product specification. Please confirm the required standard, thickness, width, length and material condition before ordering.

 

Available Grades Of Hot Rolled Titanium Plate

 

STRX TITANIUM supplies hot rolled titanium plates in commercially pure titanium and titanium alloy grades. Each grade offers different levels of strength, corrosion resistance and formability for industrial and engineering applications.

Commercially Pure Titanium Grades

Grade UNS No. Key Characteristics Typical Applications
Grade 1 R50250 High ductility, excellent formability and corrosion resistance. Chemical processing equipment, heat transfer components and formed parts.
Grade 2 R50400 Balanced strength, corrosion resistance and formability; widely used commercially pure titanium grade. Heat exchangers, desalination systems, industrial vessels and chemical processing equipment.
Grade 3 R50550 Higher strength than Grade 1 and Grade 2, while retaining corrosion resistance. Industrial equipment and components requiring higher strength than lower-grade commercially pure titanium.
Grade 7 R52400 Commercially pure titanium with a palladium addition for improved corrosion resistance in certain reducing environments. Chemical processing equipment and components exposed to demanding corrosive media.

Titanium Alloy Grades

Grade Alloy / UNS No. Key Characteristics Typical Applications
Grade 5 Ti-6Al-4V
R56400
High strength-to-weight ratio and good mechanical performance. Aerospace structures, engineering components and high-strength applications.
Grade 6 Ti-5Al-2.5Sn
R54520
Alpha titanium alloy with good strength and elevated-temperature performance. Aerospace and engineering applications requiring performance at elevated temperatures.
Grade 9 Ti-3Al-2.5V
R56320
Moderate strength, good formability and corrosion resistance. Aerospace components, lightweight engineering parts and tubing-related applications.
Grade 12 Ti-0.3Mo-0.8Ni
R53400
Molybdenum and nickel additions improve corrosion resistance in selected service environments. Chemical processing equipment, heat exchangers and systems handling corrosive fluids.
Grade 23 Ti-6Al-4V ELI
R56407
Extra-low-interstitial alloy with controlled interstitial content and high fracture toughness. Selected medical, aerospace and high-performance engineering applications.

Grade Selection: Grade availability, dimensions, delivery condition and certification depend on the production route and order requirements. Please specify the required titanium grade, applicable standard, plate dimensions and inspection requirements when requesting a quotation.

 

Hot Rolling Process Of Titanium Plate

 

The production route for hot rolled titanium plate generally involves several stages. The exact process depends on the titanium grade, starting material, target thickness and required product specification.

1. Raw Material and Slab Preparation

The starting material is checked against the specified titanium grade and production requirements. Material identification and surface condition are reviewed before the rolling process.

2. Heating

The titanium slab or intermediate material is heated to a suitable processing temperature. Heating parameters are selected according to the alloy grade and rolling procedure. Temperature control is important for maintaining consistent deformation behavior.

3. Hot Rolling

The heated material passes through rolling equipment in a controlled sequence to reduce its thickness and achieve the required plate dimensions. Rolling reduction and temperature are managed according to the material and process requirements.

4. Heat Treatment, Where Required

Heat treatment may be applied after rolling to achieve the specified material condition and mechanical properties. The heat treatment procedure depends on the grade and applicable standard.

5. Surface Treatment

Surface processing may include descaling, pickling or other finishing operations according to the required surface condition. Bright or pickled finishes can be specified subject to the product and processing route.

6. Cutting and Final Inspection

The plate is cut or processed to the agreed dimensions. Final checks may include thickness measurement, dimensional inspection and surface examination. Additional testing can be arranged according to the purchase specification.

 

Quality Inspection And Material Certification

 

Quality inspection is important for confirming that hot rolled titanium plate meets the agreed material and dimensional requirements. Inspection items are selected according to the grade, applicable standard and purchase order.

Inspection and documentation may include:

Chemical Composition Analysis: Verification of alloying elements and controlled impurities according to the specified grade.

Tensile Testing: Measurement of tensile strength, yield strength and elongation when required by the product specification.

Thickness and Dimensional Inspection: Checking plate thickness, width, length and dimensional tolerances.

Surface Inspection: Examination for visible surface defects and confirmation of the specified surface condition.

Material Traceability: Identification of material grade and corresponding production or inspection records.

Material Test Certificate: MTC can be supplied according to the order requirements.

Third-Party Inspection: Independent inspection can be coordinated when agreed before order confirmation.

Additional tests should be specified in advance. Acceptance criteria are based on the applicable standard, material grade, product dimensions and agreed inspection requirements.

Quality Inspection
Quality Inspection

Hot Rolled Vs Cold Rolled Titanium Plate

 

Hot rolling and cold rolling are different metalworking processes. The selection between hot rolled and cold rolled titanium plate depends on thickness, dimensional tolerance, surface finish, forming requirements and the intended application.

Comparison Hot Rolled Titanium Plate Cold Rolled Titanium Plate
Processing Rolling at elevated temperature Rolling at or near room temperature after suitable prior processing
Typical Product Range Commonly used for medium and heavier plate thicknesses Commonly used for thinner sheet and plate products
Surface Condition May require descaling, pickling or further finishing Can provide a smoother surface depending on the finishing route
Dimensional Control Tolerance depends on thickness, rolling route and finishing Often selected when tighter dimensional control is required
Typical Selection Medium or heavy plate applications Thin products and applications requiring specific surface or dimensional conditions

Neither process automatically guarantees higher strength or better ductility. Final mechanical properties depend on the titanium grade, deformation history, heat treatment and delivery condition. When procuring, compare specified tensile properties, dimensional tolerances, and surface requirements rather than selecting a product based on rolling method alone.

 

Hot Rolled Titanium Plate Thickness And Dimensions

 

STRX TITANIUM's listed hot rolled titanium plate thickness range is 3–20 mm. The required thickness should be selected according to the design load, corrosion allowance where applicable, forming method, fabrication process and applicable engineering specification.

 

We can discuss width and length based on the required plate size and production feasibility. Cut-to-size processing may be arranged based on the agreed dimensions.

 

  • When requesting a quotation for hot rolled titanium plate, please provide:
  • Titanium grade and applicable standard
  • Required thickness
  • Plate width and length
  • Surface finish, such as pickled or bright
  • Required delivery condition or heat treatment condition
  • Quantity and inspection or certification requirements

 

Actual availability and dimensional tolerances should be confirmed against the selected grade, product specification and order requirements.

 

Applications Of Industrial Hot Rolled Titanium Plate

 

Industrial hot rolled titanium plate is selected for equipment and components where corrosion resistance, strength, weight and service conditions are important. The appropriate grade depends on the chemical medium, operating temperature, mechanical loading and fabrication requirements.

Chemical Processing Equipment

Commercially pure titanium and selected titanium alloy grades are used in reaction vessels, storage tanks, process equipment and other components exposed to corrosive chemicals. Grade 2 and Grade 7 may be considered for different chemical environments. The actual medium, concentration and temperature must be evaluated before material selection.

Heat Exchangers and Evaporators

Titanium plate is used in heat transfer equipment where corrosion resistance and long-term material performance are required. Grade 2 is commonly considered for suitable industrial heat exchanger applications, while other grades may be selected according to the operating conditions.

Seawater Desalination Equipment

Titanium's resistance to seawater corrosion makes it a material option for selected desalination equipment, condensers and heat transfer systems. Grade selection should consider seawater temperature, flow velocity, crevice conditions and equipment design.

Aerospace and Engineering Components

Titanium alloy plates such as Grade 5, Grade 6 and Grade 9 are used in selected aerospace and engineering applications where strength-to-weight ratio and mechanical performance are important. The required aerospace specification, material condition and traceability should be stated in the purchase order.

Medical and High-Performance Applications

Grade 23 Ti-6Al-4V ELI is used in applications requiring controlled interstitial content and specific mechanical properties. Medical or implant-related orders require confirmation of the applicable standard, product form, material condition and certification requirements.

 

Why Choose STRX TITANIUM?

 

Multiple Titanium Grades

We supply commercially pure titanium and titanium alloy plate options, including Grade 1, 2, 3, 5, 6, 7, 9, 12 and 23, subject to product availability and order requirements.

Material and Specification Coordination

Our team can discuss material grade, applicable standard, dimensions, surface condition and inspection requirements before order confirmation.

Production and Quality Coordination

Production arrangements and quality checks are coordinated according to the agreed technical requirements. Inspection records and material documentation can be provided as specified in the order.

Custom Cutting and Order Support

Cut-to-size requirements and trial orders can be discussed according to material availability, processing feasibility and order quantity.

Export Packaging

Export packaging can include waterproof inner protection, iron outer protection and fumigated wooden pallets, subject to product dimensions and shipping requirements.

Export Packaging
Export Packaging

Frequently Asked Questions

 

1. What is hot rolled titanium plate?

Hot rolled titanium plate is produced by rolling titanium material at an elevated temperature. It is commonly used for medium and heavy plate applications in industrial equipment and engineering projects.

2. What is the difference between hot rolled and cold rolled titanium plate?

Hot rolling is generally used for medium and thicker plates, while cold rolling is commonly used for thinner products requiring specific surface finishes or dimensional tolerances. Final properties depend on the material grade and processing conditions.

3. Which grades are available?

STRX TITANIUM supplies Grade 1, 2, 3, 5, 6, 7, 9, 12 and 23 hot rolled titanium plates, subject to production availability and order requirements.

4. What thicknesses are available?

The listed thickness range is 3–20 mm. Custom dimensions can be discussed according to the selected grade and production requirements.

5. Which standards apply to hot rolled titanium plate?

ASTM B265 is a commonly specified standard for titanium and titanium alloy plate. The applicable grade, delivery condition and inspection requirements should be confirmed for each order.

6. What surface finishes and inspection documents are available?

Pickled and bright surface options are available subject to product requirements. A Material Test Certificate (MTC) and additional inspection documents can be provided according to the order specification.

 

Request a Quote for Hot Rolling Titanium Plate


STRX Titanium is recognized for superior hot rolling titanium plate products and competitive pricing. With rigorous quality control and professional technical support, we look forward to collaborating with you. As a leading titanium plate manufacturer and supplier in China, we offer specialized materials tailored to diverse applications. Contact us to learn more about our hot rolling titanium plate.

Email: info@strx-titanium.com

WhatsApp: +86 177 9280 2189

 

Hot Tags: hot rolling titanium plate, China hot rolling titanium plate manufacturers, suppliers, factory, Grade 12 Titanium Alloy Plate, titanium sheet for jewelry, titanium sheet 1mm, 6al 4v titanium sheet, Grade 7 Ti 0 2Pd Titanium Sheet, titanium plate