STRX TITANIUM supplies titanium TIG welding rods for joining commercially pure titanium and titanium alloy components. Available filler metal grades include ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-12 and ERTi-23, classified under AWS A5.16.
Our titanium TIG filler rods are supplied in straight form, with diameters from 3.0 mm to 5.0 mm and pickled or bright surface finishes. Grade selection should be based on the base metal composition, welding procedure, service environment and required weld properties.
Material test reports and third-party inspection reports can be provided according to order requirements. Customers can specify the filler metal grade, diameter, surface condition and inspection requirements when requesting a quotation.


Titanium TIG Welding Rod Specifications
The following specifications describe the available titanium welding rod range. Confirm the required grade, dimensions and acceptance requirements before placing an order.
| Item | Specification |
|---|---|
| Product | Titanium TIG Welding Rods / Titanium Filler Rods |
| Standard | AWS A5.16 / A5.16M |
| Available Grades | ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-12, ERTi-23 |
| Diameter | 3.0–5.0 mm |
| Supply Form | Straight,Spool,Coil |
| Surface | Pickled / Bright |
| Documentation | Material Test Reports and Third-Party Inspection Reports, as agreed |
Available Titanium TIG Filler Metal Grades
Different titanium filler metal grades are designed for different base metal compositions and service requirements. The available grades cover commercially pure titanium and selected titanium alloys.
1. Commercially Pure Titanium Welding Rods
ERTi-1, ERTi-2, ERTi-3 and ERTi-4 are commercially pure titanium filler metal classifications with different interstitial element limits and strength levels.
ERTi-1: Used where a lower-strength commercially pure titanium filler metal is specified. It is commonly considered for welding Grade 1 titanium.
ERTi-2: A commonly selected filler metal for Grade 2 titanium welding. It is used in industrial titanium fabrication where corrosion resistance and weld compatibility are important.
ERTi-3: A higher-strength commercially pure titanium filler metal option than ERTi-1 and ERTi-2.
ERTi-4: A higher-strength commercially pure titanium filler metal classification within this group.
2. Titanium Alloy Welding Rods
For titanium alloy fabrication, the filler metal must be selected according to the base alloy, mechanical requirements and applicable welding procedure.
ERTi-5: Titanium alloy filler metal associated with Ti-6Al-4V welding applications. It is considered for compatible Grade 5 titanium components.
ERTi-7: Palladium-bearing titanium filler metal. Its palladium addition is relevant to corrosion performance in certain reducing and chloride-containing environments.
ERTi-9: Filler metal associated with Ti-3Al-2.5V titanium alloy applications.
ERTi-12: Filler metal associated with Ti-0.3Mo-0.8Ni titanium alloy applications.
ERTi-23: Filler metal associated with Ti-6Al-4V ELI alloy applications, where low-interstitial material requirements are important.
Important: The grade descriptions above are intended as a selection reference, not a statement that every filler metal can be used interchangeably with its corresponding base metal. Final selection should follow the applicable AWS classification, base metal specification, qualified welding procedure (WPS/PQR) and project requirements.
Detailed Description
Titanium TIG welding wire and rods are manufactured in compliance with recognized national and international quality assurance standards, including TUV, BV, DNV, GL, LLOYDS, and ISO. These products offer exceptional strength, corrosion resistance, lightweight durability, and are ideal for industries such as aerospace, automotive, and marine engineering, where high-performance materials are critical.
|
Comparison Table for Titanium Welding Wire (AWS A5.16): |
||||||||||
|
AWS Classification |
CHEMICAL COMPOSITION |
|||||||||
|
AWS A5.16 |
UNS NO |
AMS |
ASTM B348 |
C |
0 |
N |
H |
Fe |
Al |
V |
|
ERTi1 |
R50100 |
AMS4951 |
GR1 |
0.03 |
0.03-0.10 |
0.012 |
0.005 |
0.08 |
||
|
ERTi2 |
R50120 |
AMS4951 |
GR2 |
0.03 |
0.08-0.16 |
0.015 |
0.008 |
0.12 |
||
|
ERTi3 |
R50125 |
AMS4951 |
GR3 |
0.03 |
0.13-0.20 |
0.02 |
0.008 |
0.16 |
||
|
ERTi4 |
R50130 |
AMS4951 |
GR4 |
0.03 |
0.18-0.32 |
0.025 |
0.008 |
0.25 |
||
|
ERTi5 |
R56400 |
AMS4954 |
GR5 |
0.03 |
0.12-0.20 |
0.03 |
0.015 |
0.22 |
5.5-6.7 |
3.5-4.5 |
|
ERTi7 |
R52401 |
N/A |
GR7 |
0.03 |
0.08-0.16 |
0.015 |
0.008 |
0.12 |
||
|
ERTi9 |
R56320 |
N/A |
GR9 |
0.03 |
0.06-0.12 |
0.012 |
0.005 |
0.2 |
||
|
ERTi23 |
R56408 |
AMS4956 |
Grade 23 (Ti-6Al-4V ELI) |
0.03 |
0.03-0.11 |
0.012 |
0.005 |
0.2 |
5.5-6.5 |
3.5-4.5 |
How To Select The Right Titanium TIG Welding Rod
Choosing a titanium TIG filler rod based only on diameter or nominal grade can lead to an unsuitable weld deposit. Before purchasing, welding engineers and buyers should confirm the following information.
1. Match the Filler Metal to the Base Metal
Identify the exact titanium grade and material specification of the components being welded. Commercially pure titanium and titanium alloys have different chemical compositions and mechanical requirements. The filler metal should be selected according to the qualified welding procedure rather than relying on a general grade-to-grade assumption.
2. Consider the Service Environment
For equipment exposed to acids, chlorides, process fluids or elevated temperatures, review the corrosion and service requirements before selecting the filler metal. For example, palladium-bearing ERTi-7 may be considered for certain corrosion-critical titanium welding applications. Actual suitability depends on the specific medium, concentration, temperature and operating conditions.
3. Confirm the Required Weld Properties
For pressure equipment, chemical processing systems and structural components, review the required weld strength, ductility, corrosion performance and inspection criteria. The filler metal classification alone does not establish the mechanical properties of the finished weld joint.
4. Specify the Correct Rod Diameter
Rod diameter should be selected according to joint design, material thickness, welding current, welding position and welding procedure. STRX TITANIUM offers titanium TIG welding rods in diameters from 3.0 mm to 5.0 mm.
Titanium TIG Welding Rod Surface And Handling Requirements
Surface cleanliness is particularly important when welding titanium. Oil, grease, moisture, oxide, dust and other contaminants can affect weld quality. Titanium filler rods should be kept clean and dry before use.
- Pickled surface: A chemically treated surface condition intended to remove surface scale and contamination generated during processing.
- Bright surface: A cleaner, bright appearance suitable for applications requiring a controlled surface condition.
- Storage: Keep rods in clean, dry packaging and avoid contact with contaminated tools or work surfaces.
- Welding preparation: Clean the filler rod and joint area using an approved procedure before welding.
During TIG welding, adequate shielding gas coverage is essential. The weld pool, hot filler metal and heat-affected areas must be protected from atmospheric contamination. Gas purity, torch shielding, trailing shielding and back purging should be controlled according to the qualified welding procedure.
Manufacturing And Quality Inspection
Dimensional consistency, surface condition and material traceability are important when purchasing titanium welding filler rods. The production and processing route is determined by the specified grade, diameter and supply requirements.
Production and Processing
- Raw Material Selection: Select titanium or titanium alloy feedstock according to the required filler metal grade and applicable specification.
- Material Processing: Process the feedstock through the appropriate forming and drawing operations to achieve the specified rod diameter.
- Straightening and Cutting: Straighten the rods and cut them to the agreed supply length.
- Surface Treatment: Apply the specified pickled or bright surface condition.
- Final Inspection: Check dimensions, surface condition, identification and packaging before delivery.
-


Quality Inspection and Documentation
Inspection requirements can be agreed according to the order specification. Available documentation may include:
- Chemical Composition Test Report
- Material Test Certificate (MTC)
- Dimensional Inspection Report
- Surface Condition Inspection
- Third-Party Inspection Report, when required
For projects requiring specific chemical limits, mechanical test requirements or traceability, provide the applicable standard and acceptance criteria before order confirmation. Inspection documents should correspond to the actual supplied material and batch.
Applications of Titanium TIG Welding Rods
Titanium TIG welding rods are used in fabrication and repair work involving titanium and titanium alloy components. Typical application areas include:
- Chemical Processing Equipment: Titanium tanks, piping, heat exchangers and corrosion-resistant process equipment.
- Industrial Piping Systems: Titanium pipe joints, fittings and process fluid transportation systems.
- Marine Equipment: Titanium components exposed to seawater and selected chloride-containing environments.
- Aerospace Components: Welding applications involving specified titanium alloy materials and qualified welding procedures.
- Power and Energy Equipment: Titanium components used in specialized industrial equipment.
The appropriate filler metal grade must be confirmed against the component material, service conditions and applicable welding procedure.
Why Source Titanium TIG Welding Rods From STRX TITANIUM?
- Multiple Filler Metal Grades: Supply options include ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-12 and ERTi-23.
- Specified Dimensions: Available diameters range from 3.0 mm to 5.0 mm, with straight rod supply.
- Surface Options: Pickled and bright surface conditions are available according to order requirements.
- Inspection Documentation: Material test reports and third-party inspection reports can be arranged as agreed.
- Sample Support: Samples can be discussed for grade, diameter and application evaluation.
- Order Coordination: Grade, dimensions, inspection requirements, packaging and delivery terms can be confirmed before production and shipment.
-


STRX TITANIUM is the brand of Shaanxi STRX Metal Material Co., Ltd. For technical inquiries and quotations, contact our team with your required filler metal grade, diameter, quantity and applicable standard.
Frequently Asked Questions About Titanium TIG Welding Rods
Q: 1. What Standard Applies To Titanium TIG Welding Rods?
A: AWS A5.16/A5.16M is the main AWS specification for titanium and titanium-alloy welding electrodes and rods. Confirm the required edition and classification when placing an order.
Q: 2. What Is The Difference Between ERTi-1 And ERTi-2 Welding Rods?
A: ERTi-1 and ERTi-2 are commercially pure titanium filler metal classifications with different interstitial element limits. ERTi-1 has lower oxygen limits and is generally associated with lower strength and higher ductility than ERTi-2. The appropriate grade depends on the base metal and welding procedure.
Q: 3. Which Titanium TIG Welding Rod Is Used For Grade 5 Titanium?
A: ERTi-5 is associated with Ti-6Al-4V filler metal applications. The final selection should be confirmed against the base metal specification, required weld properties and qualified welding procedure.
Q: 4. What Is ERTi-7 Titanium Welding Rod Used For?
A: ERTi-7 is a palladium-bearing titanium filler metal. It may be selected for certain corrosion-critical applications where improved resistance in specific reducing or chloride-containing environments is required. Confirm suitability for the actual service medium and welding procedure.
Q: 5. What Diameters Are Available For Titanium TIG Welding Rods?
A: STRX TITANIUM offers titanium TIG welding rods in diameters from 3.0 mm to 5.0 mm. Confirm the required diameter and supply details when requesting a quotation.
Q: 6. Can You Provide Material Test Reports And Third-Party Inspection?
A: Material test reports and third-party inspection reports can be arranged according to order requirements. Please specify the required inspection scope and documentation before order confirmation.
Q: 7. How Should Titanium TIG Welding Rods Be Stored Before Use?
A: Store titanium filler rods in clean, dry packaging. Protect them from oil, grease, moisture, dust and other contaminants. Clean the rods according to the approved welding procedure before use.
Request A Quote For Titanium TIG Welding Rods
STRX Titanium is recognized for superior Titanium TIG welding wire and rods and competitive pricing. With rigorous quality control and professional technical support, we look forward to collaborating with you. As a leading titanium manufacturer and supplier in China, we offer specialized materials for diverse applications. Contact us to learn more about our Titanium TIG welding wire and rods.
Email: info@strx-titanium.com
Hot Tags: Titanium TIG welding rods, China Titanium TIG welding rods manufacturers, suppliers, factory, Titanium Welding Wire Spool, titanium welding filler rod, titanium filler rod, Titanium 6Al 4V Welding Wire, erti 5 filler rod, ERTi 1 Pure Titanium Welding Wire

