Product Overview
Titanium-aluminum alloy sputtering target material is a metallic target used in vacuum magnetron sputtering (PVD) processes. Composed of titanium (Ti) and aluminum (Al) alloyed in specific atomic ratios (20%-80% Ti), common formulations include TiAl 33/67, TiAl 40/60, and TiAl 50/50. This combination integrates titanium's high melting point and corrosion resistance with aluminum's high thermal conductivity and low density within a single target.
Chemical Characteristics
|
Parameter |
Typical Value/Description |
|
Purity |
99%-99.95% (3N-3N5) metallic purity, O₂ ≤0.02% |
|
Composition Range |
Ti 20%-80% (atomic ratio), balance Al |
|
Intermetallic Compounds |
May form Ti₃Al, TiAl, TiAl₂, TiAl₃ phases affecting brittleness and processability |
|
Corrosion Resistance |
Forms dense oxide film in air/acid/alkaline environments; superior to pure Al targets |
|
Melting Point |
Between ~1,600°C (Ti) and 660°C (Al); higher than pure Al, suitable for high-temperature sputtering |
Mechanical Properties
|
Parameter |
Typical Range |
|
Density |
≥99% theoretical density (~4.5 g·cm⁻³) |
|
Grain Size |
≤100 µm (fine, uniform grains via HIP) |
|
Hardness |
HV ≈300-400 (Ti content dependent) |
|
Tensile Strength |
450-600 MPa (higher with increased Ti) |
|
Elastic Modulus |
~150 GPa (~2× higher than pure Al) |
Manufacturing Processes
Powder Metallurgy - Hot Isostatic Pressing (HIP)
Ti and Al powder mixing → Cold isostatic pressing → Vacuum degassing → HIP sintering → Precision turning/polishing.
*Achieves ≥99% density, porosity-free, uniform composition, and fine grains.*
High-Current Heating (Resistance Heating)
Rapid heating of alloy powder via high current, followed by hot pressing. Suitable for mass production but may result in coarse grains and higher porosity risk.
Traditional Melting & Casting
Note: Less prevalent due to intermetallic compound formation, bubbling, and segregation issues during melting.
Shapes & Specifications
|
Shape |
Common Dimensions |
Notes |
|
Planar Target (Rectangular/Arc) |
Ø63mm×32mm (small) to 1,200mm×250mm (large) |
Standard configurations available |
|
Rotary Target (Cylindrical) |
Ø200-1,000mm, custom lengths |
Ideal for large-area uniform deposition |
|
Round Target |
Ø50-500mm |
Common for laboratory-scale deposition |
|
Tubular/Rod Target |
Ø30-150mm, lengths up to 1,000mm |
Suitable for specialized geometric requirements |
All shapes can be vacuum-packed, surface-polished, or micro-drilled per customer requirements.
Primary Applications
|
Industry Sector |
Typical Applications |
|
Semiconductor Manufacturing |
Ti-Al barrier/contact layers, enhancing corrosion resistance and conductivity |
|
Photovoltaics (Solar Cells) |
Back-surface field layers or metal grids, improving photoelectric conversion efficiency |
|
LED & Display |
High-reflectivity, heat-resistant metal layers for enhanced optical performance |
|
Decorative Coatings |
Metal layers for consumer electronics (phones, watches, glasses), combining aesthetics and durability |
|
Tool/Mold Coatings |
Ti-Al intermetallic coatings on carbide tools/molds, improving wear resistance and service life |
|
Aerospace |
Protective coatings for lightweight structural components, offering high-temperature and corrosion resistance |
|
Automotive |
Functional/decorative coatings for headlights, instrument panels, etc. |
Product Advantages
High Sputtering Rate: Aluminum's low melting point and high evaporation coefficient enable higher deposition rates compared to pure Ti targets at equivalent power.
Superior Film Adhesion: Titanium's high chemical activity forms strong bonds between film and substrate.
Corrosion & Heat Resistance: Dense oxide formation ensures performance in high-temperature and corrosive environments.
Lightweight: Lower density than pure Ti reduces target weight and equipment load.
Adjustable Composition: Ti/Al ratio tuning enables customized electrical, optical, and mechanical properties.
Extended Service Life: High density and low porosity maintain stable sputtering rates, reducing replacement frequency.
FAQ:
Do you provide samples?
A: Yes, we offer complimentary samples with shipping arranged by the customer. We recommend testing samples or placing trial orders before larger purchases.
Q: How competitive are your prices?
A: Our pricing reflects exceptional value when considering the premium quality and comprehensive service we provide.
Q: What is your quotation turnaround time?
A: Typically 24 hours after inquiry receipt. Urgent requests receive priority handling upon notification.
Q: How do I request custom products?
A: Please share your drawings, images, or samples. We will confirm specifications and promptly initiate production.
About STRX Titanium – Why Choose Us?
Premium Materials:We select premium raw materials to ensure quality control from the source.
Rigorous Quality Inspection:Strict quality inspection standards are implemented to ensure 100% compliance with customer requirements.
Customized Solutions:We understand that each industry has unique needs. Our team works closely with clients to tailor products based on specific requirements. We customize all titanium products (color/size, etc.) according to customer drawings or ideas.
Fast Delivery:Advanced production management ensures efficient and prompt delivery from production to shipment.
Expert Support:Gain insights from our dedicated expert team, who provide professional advice and practical assistance. STRX Titanium helps you identify and select the best solutions tailored to your business needs, ensuring optimal results and satisfaction.
STRX Titanium has earned consistent praise from clients for high-quality products and competitive pricing. With strict quality control and professional technical support, we look forward to cooperating with you!
In Summary,STRX Titanium is a leading manufacturer and supplier of titanium products in China. We maintain strong technical partnerships with major domestic and international equipment manufacturers and uphold rigorous quality standards to meet client demands.
If you are looking for a reliable titanium product supplier, please contact us immediately to learn more about our products and services.
Email: info@strx-titanium.com
Hot Tags: titanium-aluminum alloy sputtering target material, China titanium-aluminum alloy sputtering target material manufacturers, suppliers, factory, titanium sputtering target, titanium nitride sputtering target, molybdenum sputtering target, sputtering target backing plate, custom sputtering targets, tungsten sputter target

