Grade 7 titanium sheet is a palladium-modified commercially pure titanium alloy containing 0.12–0.25% palladium (Pd). Its UNS designation is R52400, and its chemical composition is specified under ASTM B265.
The addition of palladium improves corrosion resistance, particularly in reducing acid environments and conditions where crevice corrosion may occur. Compared with Grade 2 titanium, Grade 7 provides enhanced corrosion resistance in selected chemical processing applications while retaining good formability and weldability.
STRX TITANIUM supplies Grade 7 Titanium Sheet for chemical processing equipment, heat exchangers, pressure vessels and other industrial applications requiring reliable corrosion resistance. Custom dimensions, surface finishes and inspection requirements can be arranged according to project specifications.



Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Grade 7 Titanium Sheet |
| Material Grade | Grade 7 (Ti-0.2Pd) |
| UNS | R52400 |
| Material Number | 3.7235 |
| Standard | ASTM B265 |
| Thickness Range | 0.5–4.75 mm |
| Width Range | 1000–2000 mm |
| Length Range | Up to 6000 mm |
| Surface Finish | Pickled, Polished, Sandblasted |
| Shape | Flat Sheets, Custom-Cut Sheets |
| Manufacturing Process | Hot Rolling, Cold Rolling |
| Supply Condition | Annealed |
| Inspection | Chemical Composition, Mechanical and Dimensional Testing |
| Delivery Time | 5–20 days, depending on specifications and order quantity |
| Certification | Material Test Certificate (MTC); SGS inspection available upon request |
| Samples | Free samples available upon request |
Custom widths, lengths and cutting dimensions are available according to order requirements and production capability. Thicker Grade 7 titanium plate can also be supplied upon request.
Chemical Composition
Grade 7 titanium alloy contains a small amount of palladium, which improves its corrosion resistance compared with commercially pure titanium grades. The following table shows the typical chemical composition limits specified under ASTM B265.
| Element | Chemical Composition (wt.%) |
|---|---|
| Titanium (Ti) | Balance |
| Palladium (Pd) | 0.12–0.25 |
| Iron (Fe) | ≤0.30 |
| Oxygen (O) | ≤0.25 |
| Carbon (C) | ≤0.08 |
| Nitrogen (N) | ≤0.03 |
| Hydrogen (H) | ≤0.015 |
Mechanical Properties
| Mechanical Property | Requirement |
|---|---|
| Tensile Strength | ≥345 MPa |
| Yield Strength (0.2% Offset) | ≥275 MPa |
| Elongation | ≥20% |
Grade 7 vs. Grade 2 Titanium: Corrosion Resistance Differences
Grade 7 and Grade 2 Titanium Sheet share a commercially pure titanium base, but differ in palladium content. Grade 2 has no intentional Pd addition, while Grade 7 contains 0.12–0.25% Pd, which improves electrochemical behavior and supports the stability and recovery of the protective passive film.
The advantage of Grade 7 is particularly relevant when reducing acids or localized corrosion conditions challenge the passive film of commercially pure titanium. It is not simply that Grade 7 is stronger or more corrosion-resistant in every environment.
| Comparison | Grade 2 Titanium | Grade 7 Titanium |
|---|---|---|
| Material Type | Commercially Pure Titanium | Palladium-Modified Titanium |
| UNS | R50400 | R52400 |
| Palladium Content | No intentional Pd addition | 0.12–0.25% |
| General Corrosion Resistance | Good in many industrial environments | Improved in selected reducing environments |
| Reducing Acid Resistance | More limited | Enhanced |
| Crevice Corrosion Resistance | More susceptible under severe conditions | Improved resistance |
| Typical Applications | General chemical equipment, heat exchangers | More demanding chemical processing equipment |
Key Technical Questions
1. Why choose Grade 7 titanium for certain chemical environments?
Titanium normally relies on a stable oxide film to resist corrosion. In reducing acids, the passive film can become less stable, increasing the risk of active metal dissolution. The palladium addition in Grade 7 improves electrochemical performance and helps maintain passivity in selected reducing environments. It is worth considering for chemical reactors exposed to reducing acids, heat exchangers handling aggressive chemical solutions, acid processing and recovery equipment, chemical storage and transfer systems, and equipment with joints, gaskets or narrow gaps where crevice corrosion may occur.
2. How does palladium improve crevice corrosion resistance?
Within narrow gaps beneath gaskets, deposits, fasteners or overlapping surfaces, restricted mass transfer can lead to local acidification and chloride concentration, destabilizing the passive film. The palladium addition in Grade 7 increases the pitting potential and repassivation potential in chloride-containing solutions, giving it a greater ability to maintain or restore passivity when localized corrosion conditions develop. However, palladium does not make titanium immune to all forms of crevice corrosion. Temperature, chloride concentration, pH, crevice geometry and exposure conditions remain important factors.
3. Which corrosive media are suitable for Grade 7 titanium?
Grade 7 is primarily considered for reducing acid environments where Grade 2 may have insufficient corrosion resistance. Typical media requiring evaluation include hydrochloric acid (HCl), sulfuric acid (H₂SO₄), oxalic acid, chloride-containing solutions and phosphoric acid. The corrosion resistance of Grade 7 varies with concentration, temperature, impurities, pH and crevice geometry, and it should not be assumed suitable for every concentration or temperature of these chemicals.
Important limitation: Titanium is highly susceptible to attack by hydrofluoric acid (HF), including at low concentrations. Grade 7 should not be selected for HF service without specific corrosion engineering evaluation.
4. When is Grade 2 titanium sufficient instead of Grade 7?
Grade 7 is not necessary for every corrosion-resistant titanium application. Grade 2 may be sufficient in neutral or mildly corrosive aqueous environments, many seawater and chloride-containing applications within suitable temperature and design limits, oxidizing acid environments where commercially pure titanium already provides adequate resistance, and chemical equipment operating at temperatures and concentrations that do not create significant reducing-acid or crevice corrosion risks. Choosing Grade 7 when Grade 2 already meets the corrosion requirements may increase material costs without providing a necessary performance benefit.
Further reading: For a deeper comparison of corrosion mechanisms and test data, see our supporting article
Grade 7 vs. Grade 2 Titanium: Differences in Corrosion Resistance.
Manufacturing Process
The production of Grade 7 titanium alloy sheet involves controlled melting, hot working, rolling and surface treatment to achieve the required chemical composition, dimensions and material properties.
- Raw Material Preparation: Titanium raw materials and palladium-bearing alloying additions are prepared according to the required Grade 7 composition.
- Melting and Ingot Production: Titanium alloy ingots are produced through controlled vacuum melting processes.
- Hot Forging and Hot Rolling: Ingots are converted into intermediate slabs and rolled to reduce thickness.
- Cold Rolling: Further thickness reduction is performed to achieve the specified dimensions and surface quality.
- Annealing: Heat treatment is carried out according to the required material condition and processing specifications.
- Pickling and Surface Treatment: Oxide layers and surface scale are removed, followed by the specified surface finishing.
- Leveling and Cutting: Sheets are leveled, cut and prepared to meet dimensional requirements.
- Final Inspection: Chemical composition, mechanical properties, dimensions and surface condition are inspected before packaging


Applications
Due to its enhanced corrosion resistance, Grade 7 titanium sheet is used in selected industrial applications where equipment is exposed to corrosive fluids and demanding chemical conditions. It is commonly supplied as Titanium Sheet for fabrication into the following equipment:
- Chemical Processing Equipment: Selected reactors, process vessels, tanks and equipment exposed to reducing acids and corrosive chemicals.
- Heat Exchangers: Heat exchanger components where corrosion resistance and long-term material performance are important. Grade 7 sheet is often used alongside Titanium Welded Pipe in tube-and-shell equipment.
- Pressure Vessels and Storage Tanks: Fabricated equipment designed for corrosive industrial service, subject to engineering and code requirements.
- Chemical Transfer and Process Systems: Selected components exposed to chloride-containing solutions and other aggressive process media.
Material selection should be based on the specific chemical environment, operating temperature, pressure and applicable equipment design requirements.
Quality Inspection & Certification
| Inspection Items | Material Documentation |
|---|---|
|
|


Package


Why Choose STRX TITANIUM
- Material Selection: We supply Grade 7 titanium sheet according to the specified material grade and applicable standards.
- Production Management: Production scheduling and order coordination according to required dimensions and delivery conditions.
- Quality Inspection: Chemical composition, mechanical properties, dimensional and surface inspections can be arranged.
- Flexible Specifications: Custom thicknesses, widths, lengths, and cutting dimensions, within production capability.
- Material Documentation: MTC and third-party inspection arrangements available according to order requirements.
- Export Packaging: Waterproof inner protection and suitable outer packaging, including fumigated wooden pallets where required.
- Order Support: Sample requests, trial orders and technical specification confirmation before bulk purchasing.
Need Grade 7 Titanium Sheet for Your Project?
Contact STRX TITANIUM to discuss dimensions, material standards, inspection scope and delivery arrangements.
Email: info@strx-titanium.com
Hot Tags: Grade 7 Titanium Sheet, China Grade 7 Titanium Sheet manufacturers, suppliers, factory, Grade 12 Titanium Alloy Plate, titanium sheet for jewelry, titanium sheet 1mm, 6al 4v titanium sheet, Grade 7 Ti 0 2Pd Titanium Sheet, titanium plate

