Product Overview
Molybdenum sputtering target material retains the fundamental properties of pure molybdenum. This silver-gray metal features a Mohs hardness of 5.5 and a standard atomic weight of 95.95 g/mol. With a melting point of 2,623°C (4,753°F), it ranks among the highest-melting-point commercial metals, surpassed only by tantalum, osmium, rhenium, tungsten, and carbon in naturally occurring elements. Molybdenum exhibits one of the lowest thermal expansion coefficients among commercially available metals.
Technical Specifications
|
Parameter |
Specifications |
Description |
|
Chemical Composition |
Pure Mo ≥99.95% (up to 99.99%-99.999% available) |
High purity ensures optimal electrical and optical film properties |
|
Density |
10.2 g·cm⁻³ (relative density ≥98%) |
Near-theoretical density reduces particle emission during sputtering |
|
Melting/Boiling Point |
~2610°C / ~5560°C |
Maintains structural integrity in high-power magnetron sputtering |
|
Thermal Conductivity |
138-142 W·m⁻¹·K⁻¹ |
Efficient heat dissipation enhances process stability |
|
Electrical Conductivity |
~1.9 × 10⁷ S·m⁻¹ (resistivity ~0.054 Ω·mm²·m⁻¹) |
Low resistance facilitates DC sputtering and higher deposition rates |
|
Thermal Expansion Coefficient |
4.8-4.9 × 10⁻⁶ K⁻¹ |
Low expansion minimizes thermal stress, suitable for large-area substrates |
|
Mechanical Properties |
Tensile strength ~610 MPa, elongation ≥10%, Vickers hardness ~540 HV (coating) or 260-300 HV (pure Mo) |
High strength and moderate hardness prevent fracture under high-energy ion bombardment |
|
Shapes/Specifications |
Circular, rectangular, planar, tubular, ring, elliptical; thickness ≥1 mm, diameter 0-48 inches (customizable) |
Diverse configurations for planar, rotary sputtering, and vacuum furnace applications |
|
Surface Quality |
Surface roughness ≤32 Ra, polished or CNC-machined silver-white finish |
Superior surface finish reduces particle emission and improves film uniformity |
Applications
Flat Panel Displays (TFT-LCD, OLED): Gate/source-drain metallization, barrier layers, and protective coatings for large glass substrates requiring high uniformity
Thin-film Solar Cells (CIGS, CdTe): Back electrodes and optical reflection layers to enhance photoelectric conversion efficiency
Semiconductor Devices: Barrier and contact layers in microelectronics and integrated circuits, compatible with high-temperature processes
Optical Glass & Decorative Coatings: Anti-reflection and scratch-resistant metal films for architectural glass, automotive glass, and optical components
Aerospace & High-temperature Components: Critical parts for vacuum furnaces, heating elements, and thermal insulation requiring high-temperature and corrosion resistance
Magnetic Recording & Sensors: Highly conductive, low-magnetic-resistance layers for magnetic recording media and sensors
Product Advantages
|
Advantage |
Key Benefits |
|
High Temperature Resistance |
Melting point >2600°C maintains structural integrity in high-power magnetron sputtering and plasma environments |
|
Excellent Electrical/Thermal Conductivity |
High conductivity (~1.9 × 10⁷ S·m⁻¹) and thermal conductivity (~140 W·m⁻¹·K⁻¹) enable rapid heat dissipation and uniform deposition |
|
Low Expansion & Corrosion Resistance |
Minimal thermal expansion (~4.8 × 10⁻⁶ K⁻¹) and chemical inertness ensure stability in oxidizing and acid/alkaline environments |
|
High Density & Low Porosity |
Relative density ≥98% (up to ≥99.5%) significantly reduces particle emission during sputtering, enhancing film quality |
|
Superior Mechanical Strength |
High tensile strength (~610 MPa) and elongation (≥10%) with moderate hardness prevent fracture under high-energy ion bombardment |
|
Customizable Geometry |
Multiple configurations (circular, planar, tubular, ring) with flexible dimensions adapt to various sputtering systems |
|
High Purity Assurance |
Purity ≥99.95% (up to 99.999%) with impurities ≤0.001% enhances electrical and optical uniformity of deposited films |
Typical Technical Parameters
Density: 10.2 g·cm⁻³ (theoretical)
Relative Density: ≥98% (up to ≥99.5%)
Melting Point: ~2610°C, Boiling Point: ~5560°C
Thermal Conductivity: 138-142 W·m⁻¹·K⁻¹
Electrical Resistivity: 0.054 Ω·mm²·m⁻¹
Thermal Expansion Coefficient: 4.8-4.9 × 10⁻⁶ K⁻¹
Tensile Strength: ~610 MPa
Elongation: ≥10%
Hardness: ~540 HV (coating) or 260-300 HV (pure Mo)
Surface Roughness: ≤32 Ra (polished)
Quality Control
Chemical Purity: ICP and XRF analysis ensure Fe, W and other impurities ≤0.001%
Density Verification: Archimedes method or X-ray CT scanning confirms relative density ≥98%
Grain Structure: Metallurgical microscopy ensures grain size ≤150 µm, with HIP or heat treatment for refinement
Surface Quality: Mechanical grinding and ultrasonic cleaning achieve scratch-free, pore-free surfaces meeting roughness specifications
Bonding Integrity: ≥95% bonding rate with copper or indium backing plates (single unbonded area ≤2%) ensures heat dissipation and current conduction
Selection Guidelines
|
Application |
Recommended Specifications |
Rationale |
|
Large-area Flat Panel Displays (>3000 mm) |
Planar targets, width ≥600 mm, thickness 2-30 mm, purity ≥99.99% |
High density and low porosity enhance film uniformity |
|
High-power Rotary Sputtering (Tube Targets) |
Cylindrical targets, OD 140-180 mm, wall thickness ≥1 mm, purity ≥99.97% |
360° uniform sputtering with utilization rates up to 80%+ |
|
Prototype Development |
Ring or elliptical targets, diameter 0-48 inches, thickness ≥1 mm, purity ≥99.95% |
Easy replacement and cost-effective for R&D |
|
High-temperature/Corrosion-resistant Components |
High-purity Mo rods/crucibles, purity ≥99.99%, processable up to 200 mm diameter |
Suitable for vacuum furnaces and high-temperature environments |
FAQ:
Do you provide samples?
A: Yes, we offer complimentary samples with shipping arranged by the customer. We recommend testing samples or placing trial orders before larger purchases.
Q: How competitive are your prices?
A: Our pricing reflects exceptional value when considering the premium quality and comprehensive service we provide.
Q: What is your quotation turnaround time?
A: Typically 24 hours after inquiry receipt. Urgent requests receive priority handling upon notification.
Q: How do I request custom products?
A: Please share your drawings, images, or samples. We will confirm specifications and promptly initiate production.
Contact:
About STRX Titanium – Why Choose Us?
Premium Materials:We select premium raw materials to ensure quality control from the source.
Rigorous Quality Inspection:Strict quality inspection standards are implemented to ensure 100% compliance with customer requirements.
Customized Solutions:We understand that each industry has unique needs. Our team works closely with clients to tailor products based on specific requirements. We customize all titanium products (color/size, etc.) according to customer drawings or ideas.
Fast Delivery:Advanced production management ensures efficient and prompt delivery from production to shipment.
Expert Support:Gain insights from our dedicated expert team, who provide professional advice and practical assistance. STRX Titanium helps you identify and select the best solutions tailored to your business needs, ensuring optimal results and satisfaction.
STRX Titanium has earned consistent praise from clients for high-quality products and competitive pricing. With strict quality control and professional technical support, we look forward to cooperating with you!
In Summary,STRX Titanium is a leading manufacturer and supplier of titanium products in China. We maintain strong technical partnerships with major domestic and international equipment manufacturers and uphold rigorous quality standards to meet client demands.
If you are looking for a reliable titanium product supplier, please contact us immediately to learn more about our products and services.
Email: info@strx-titanium.com
Hot Tags: molybdenum sputtering target material, China molybdenum sputtering target material manufacturers, suppliers, factory, titanium sputtering target, titanium nitride sputtering target, molybdenum sputtering target, sputtering target backing plate, custom sputtering targets, tungsten sputter target

